EV5-510 is tuned to minimise 4G-800 LTE interference and has been developed for very low current consumption from the trunk cables, headend and from receivers. V5-EVO multiswitches are powered either via the horizontal trunk cables or locally via the auxiliary input socket. These multiswitches are ideal in small, medium and large cascaded systems where up to 40 multiswitches can be powered from single V5-034 power source. All multiswitches have stepped gain at each bank of four (eight on 24 & 32) outputs to balance subscriber signal levels and allow long and short subscriber cables to be connected to the same multiswitch.
10-Output Line Power Multiswitch
- 5-input, 10-output line powered active multiswitch.
- Can be “cascaded” up to four times to build a 40 output stepped gain multiswitch.
- 3dB trunk line through loss with 10dB SAT/Terr Gain at all outputs.
- Extremely low current consumption 70mA from trunk with DC pass up to 2A.
- Ideal as legacy multiswitch companion to Vision dSCR multiswitches.
- Built-in 75Ω switchable end of line terminator.
- Supplied with pre-mounted output earth-bars
|Number of Inputs||
4 x SAT + 1 x Terrestrial
|Number of Outputs||
|Frequency Range SAT||
4 x 950-2150MHz
|Frequency Range TERR||
1 x 85MHz – 790MHz
|Gain Control SAT||
|Output Level SAT (max)||
105dBµV (IMD3 – 35dB)
|Output Level Terr (max)||
(DIN 45004B) IMD3-60
|Output Level (DIN 45004B):||
Output 1 – 4 88dBµV /
|SAT / SAT Input Isolation||
|Output Isolation SAT / SAT / Terr||
>30dB / 35dB
|Rejection TV –SAT / SAT-TV||
>30dB / 40dB
|DC Pass from external PSU||
18V / 600mA max
|Current Consumption from Receiver:||
|Current Consumption from H Lines or External Power Supply||
12V to 18V / 60mA
|Control Signals V/Lo, H/Lo:||
11.5V – 14.5V / 0kHz, 16.5 – 19V / 0kHz
|Control Signals V/Hi, H/Hi:||
11.5V – 14.5V / 22kHz, 16.5 – 19V / 22kHz
|Dimension inc connectors:||
227 x 135 x 30mm