Ultra Low Profile 0.4cm Fixed TV Mount
- The Vision V88- range of TV mounts for LCD and Plasma televisions and monitors offers a choice of fixed, tilt and fully articulated models for the professional installer.
- These very high-quality LCD mounts are built from high-quality steel pressings and alloy castings finished in electrostatic powder coat paint for a blemish-free finish and durability.
Why Order From Vision Products...
- Fast Shipping
- High Quality
- Expert UK Support
The range has now been extended to include a universal projector ceiling mount for commercial applications. The installer can be confident of high quality, ease of installation and reliability with Vision V88- LCD mounts. All models are compatible with standard TV fixing dimensions and screw sizes including VESA standards.
All Vision V88- LCD mounts are supplied with the necessary fixings for solid walls and a selection of screw lengths and sizes with spacers for most TV/monitor applications. The installer must check the suitability of the wall for strength. For example we do not recommend mounting a TV on a dry wall partition unless there are adequate timber studs suitable for the combined load of the TV and mount. We do not supply screws or fixings for dry wall/stud partitioning.
The installer must inspect and check the suitability of the screws and spacers to be used in the back of the TV. If the screws are too long it may be possible to damage the screen and internal components of the TV. The TV should be mounted as close as possible to the LCD mount. Where a TV is curved, it may be necessary to use spacers to move the TV forward from the mount to allow for the curvature of the back of the TV.
We recommend that the installer checks in detail that the selected LCD mount is suitable for the TV and application.
If a TV with rear mounted connectors is mounted too close to the wall it may not be possible to allow space for the connectors or any cable bending radius.
The installer should also check that any uprights of the bracket assembly are compatible with the size, and design of the TV including the position of the mounting screws in the TV rear panel. Not all mounting screws are in the centre or symmetrical with the TV casing. We advise checking that the upright mounting bars are clear of any connector panels and are not visible at either the top or bottom of the TV.
|Suggested Screen Sizes||27" to 46"|
|Mounting Pattern||400 x 400mm max|
|Maximum Load||45kg (100lbs)|
|Profile||Ultra Low 0.40cm (0.16")|
|Pan / Swivel Range||Fixed|
|Finish||Matt Black Electrostatic Powder Coat|
|Product Features||Ultra Low Profile: Integrated Level Lockable Safety Device|